erf8-xxx-xx-x-d-ra-xxx-tr no of positions -010, -011, -013, -020, -025, -030, -037 -040,-049, -050, **-053, -060, -070, -075, (per row) **-053 mates with ercda row specification -d: double (use erf8-xxx-01-d-ra) lead style -01: 1.58 [.062] board -03: 2.36 [.093] board plating specification -s: selective gold (use c-231-02-s, c-231-03-s) -l :light selective gold, matte tin tail (use c-231-02-l, c-231-03-l) -ra: right angle -l : latches (see fig. 2) -egp: extended guide posts (not available with -l option option (**=not released for production) 0.25 ref .010 "d" 6.25 .246 ref (see detail 'b') "c" 0.25 "b" 0.800 .0315 (tol non-accum) "a" "a" 'b' c c c pin 01 pin 02 pin 60 pin 59 fig 1 erf8-030-01-s-d-ra shown wt-33-xx-f (see table 4) wt-33-xx-f (see table 4) "e" ref (alignment pin ctrs.) "f" 4.00 ref .157 1.32 ref .052 8.35 .329 ref "b" 0.800 .0315 (tol non-accum) 1.32 .052 ref 1.10 ref .043 c c c pin 59 pin 60 pin 01 pin 02 1.57 ref .062 1.00 ref .039 "h" "j" 6.12 .241 ref 0.35 .014 ref 0.80 .031 ref 2.50 .098 ref c c ref "c" detail 'b' scale 5 : 1 11.35 .447 "k" ref "a" ref 5.75 ref .226 (typ) 8.7 .34 erf8-xxx-01-d-ra c designed & dimensioned in millimeters [inches] (** = not released for production) option -tr : tape & reel (standard packaging) (see note 4) sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: 0.8mm dual row right angle socket assembly by: erf8-xxx-xx-x-d-ra-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d boyce 08-10-2010 4 1 sheet scale: 2:1 insulator: lcp, color black contacts: becu counterweight: brass latches: becu f:\dwg\misc\mktg\erf8-xxx-xx-x-d-ra-xxx-tr-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: 0.02[.001] max. 3. minimum pushout /pullout force: signal: 2.22 n[.5 lb.], latch and counterweight: 4.45 n [1.0 lb.] 4. for quantities up to 49 pieces, no leader, trailer, or eia-481-d reel will be supplied. for quantities from 50-124 pieces, no leader or trailer will be supplied. 5. measure at bends. 6. measured on pins only, insulator not included in measurement. 7. all dimensions symmetric about c l except as shown. 8. deleted 9. both non and -egp option parts are identical, thus interchangeable 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision m
4.40 .173 (ref) in-process 7 (form contact c-231-02-x) 90 - 2 + 1 90 - 2 + 1 r 0.35 .014 5.45 .214 r 0.35 .014 2.90 .114 c c c c c m m 6.20 .244 (see note 5) 0.15 .006 (see note 5) c-231-03-x in-process 3 (fill bottom row ) c c 0.40 .016 6.95 .274 remove carrier c in-process 4 (cutoff of carrier) c 0.65 .026 ref 7.80 .307 erf8-ra-xxx in-process 5 (fill erf8-ra-xxx) c 7.95 .313 (see note 5) 0.15 .006 (see note 5) 2.58 - 0.25 0.00 .101 - .010 + .000 in-process 8 (fill top row) c c c-231-02-x c 8.7 .34 0.40 .016 in-process 10 (cutoff of carrier) c c remove carrier c (see note 6) see table 2 in-process 9 (heat stake top row contacts) heat stake top row tails "h" 2.22 .087 in-process 11 (fill wt-33-xx-f) wt-33-xx-f (see table 4) c "j" c in-process 12 (fill t-1r37-xx-t) t-1r37-xx-t (see table 4) r 0.35 .014 ref (typ) 3.75 ref .148 (see note 5) 4.20 .165 ref 8.30 .327 ref 45 ref (typ) in-process 6 (pre-form contact c-231-02-x) c sheet of 0.8mm dual row right angle socket assembly by: erf8-xxx-xx-x-d-ra-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d boyce 08-10-2010 4 2 sheet scale: 1:0.166667 revision m f:\dwg\misc\mktg\erf8-xxx-xx-x-d-ra-xxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
sheet of 0.8mm dual row right angle socket assembly by: erf8-xxx-xx-x-d-ra-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d boyce 08-10-2010 4 3 sheet scale: 2:1 revision m f:\dwg\misc\mktg\erf8-xxx-xx-x-d-ra-xxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
0.15 .006 7.95 .313 0.35 (ref) .014 2.22 .087 8.35 .329 1.22 (ref) .048 0.40 .016 (typ) 8.7 .34 6.95 .274 3.70 (ref) .146 2.58 - 0.25 0.00 .101 - .010 + .000 section "a"-"a" scale 8 : 1 t-1r37-xx-t (see table 4) c-231-02-x c-231-03-x c erf8-ra-xxx c c c c c c c wt-33-xx-f (see table 4) c l see table 2 1.06 ref .042 (see note 5) r 0.35 ref .014 (typ) 9.66 .380 ref 11.08 .436 ref 45 ref (typ) in-process 1 (pre-form contact c-231-03-x) 90 - 2 + 1 r 0.35 .014 90 - 2 + 1 1.61 .063 (see note 5) r 0.35 .014 1.25 .049 c c c c c m m 9.91 .390 (ref) in-process 2 (form contact c-231-03-x) "g" 0.25 c wt-33-xx-f (see table 4) wt-33-xx-f (see table 4) (** = not rleased for production) (** = not released for production) fig 2 erf8-030-01-x-d-ra-l shown same as erf8-030-01-x-d-ra except as shown sheet of 0.8mm dual row right angle socket assembly by: erf8-xxx-xx-x-d-ra-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d boyce 08-10-2010 4 4 sheet scale: 6:1 revision m f:\dwg\misc\mktg\erf8-xxx-xx-x-d-ra-xxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
